Konica Minolta Scan Multi PRO instruction manual Inserting the Film Holder, Remove the holder

INSERTING THE FILM HOLDER

During the start-up time, the indicator lamp will blink. DO NOT insert the film holder into the film slot until the indicator lamp is steady.

1.Press the power switch to turn the scanner on. Turn on your computer, then launch the DiMAGE Scan Multi PRO software.

•The green indicator lamp will blink slowly while the scanner is setting up.

2.Insert the holder into the scanner in the direction indicated by the white arrow on top of the holder.

•Do not insert the holder at an

angle.

3. Gently push the holder into the scanner until the raised insertion mark is aligned with the film-slot door.

• The film holder will be automatically guided in past the mark.

•If the holder is not loaded correctly, then eject and reinsert it.

•Please take note that depending

on the type of film holder, the position of this indicator will differ.

Ejecting

1.Press the film folder eject button on the front of the scanner or click the eject button on the Main window of the DiMAGE Scan Multi PRO software.

•The holder will automatically eject partway, then stop.

2.Remove the holder.

•Wait for the Indicator lamp to turn off before removing the holder.

•The holder should pull out easily.

38