Konica Minolta Scan Multi PRO LOADING THE UNIVERSAL HOLDER UH-P1, Loading The Film Holder

LOADING THE FILM HOLDER

LOADING THE UNIVERSAL HOLDER UH-P1

The universal holder UH-P1 is used with the following attachments. Use the attachment suited to the film.

•120/220 film attachment with glass (HA-P1), glassless (HA-P2)

When scanning 120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9) film Select a film attachment with glass or a glassless film attachment according to your purpose.

With glass: When the film needs to be protected or kep flat.

Glassless: When you wish to avoid effects which may be caused by the glass, for example, if you want to stay clear of dust or dirt on the glass when scanning.

•Multi-format attachment (sold separately, HA-P3) When scanning a TEM film, 35 mm panorama film, 16 mm film, 4x4 or 24x24 film, etc.

120/220 (6x4.5, 6x6, 6x7, 6x8, 6x9) film attachment with glass (HA-P1)

1. Install the selected attachment on the holder.

Place the attachment with the button side up at the position on the holder that is suited for the attachment you selected and fix it aligning with the two grooves on the left side until it clicks. If the 120/220 film attachment with glassless (HA-P2) or the multi-format attachment (HA-P3) is installed, remove it beforehand.

2.Press the button on the attachment to open the film cover.

Before inserting a film, remove dust, etc. from the film, holder, attachment or mask using a blower brush, etc.

3.Insert the appropriate mask for the size of the

film.

Align the mask with the attachment. Fix the two protruding parts into the slots on the hinge side Fit the mask over the film guide and the two pins.

DiMAGE Scan Multi PRO 33