
IEEE 1394 INTERFACE
The IEEE1394 (FireWire for Macintosh by Apple Computer, Inc.) Interface has a
Since the IEEE1394 Interface connection does not require ID numbers or terminator settings for each units such as a SCSI, it enables easy connection of the peripheral units. Also, using 1 Interface it can connect up to 63 units to a personal computer.
When turning on or off the power, it makes no difference what you operate first the IEEE1394 Interface unit or the personal computer.
You can connect or disconnect the IEEE1394 Interface unit or the personal computer while the power is turned on. However, if any of the devices in the daisy chain are transfering data, do not unplug or connect the IEEE1394 cable.
To disconnect the IEEE1394 Interface unit:
For Windows 2000 Professional
1.Close the driver software.
2.Confirm that the indicator lamp is not blinking.
3.Disconnect the IEEE 1394 cable.
For Windows Me
1.Close the driver software.
2.Confirm that the indicator lamp is not blinking.
3.Double click on the
) located on the task bar. The unplug-
4.The hardware devices to be stopped will be displayed. Select “Minolta DiMAGE Scan Multi PRO” and click “Stop.”
5.A confirmation screen will appear. Clicking “OK” will stop the device.
6.The
When you re/discommect the IEEE1394Interface unit. make sure to leave a
The maximum length of the cable connecting the peripheral units is 4.5 m.
This unit does not provide a power source of the IEEE1394. It is necessary to obtain an AC power source separately.
106