USING THE BUILT-IN FLASH

Red-Eye Reduction

Light reflecting from your subjects eyes may produce the effect known as red-eye. Use the built-in flash’s red-eye- reduction mode to produce more natural looking photographs by reducing the red-eye effect.

1. Open the control-panel door.

2. Press the red-eye- reduction button until appears in the data panel.

•Warn your subject that the flash will fire a few short flash bursts just before the picture is taken.

• To cancel, press the red-eye-reduction button until

(and

WL) disappears from the data panel.

 

REWINDING THE FILM

Automatic Rewind

This camera automatically rewinds the film into the cassette after the last exposure.

1. Wait for the film to completely rewind into the cassette.

• The frame counter will count down

during rewind.

 

• 0 will appear and the

will blink in the

data panel when the film is rewound.

2. Press the film-chamber release to open the film- chamber door.

3. Remove the film.

• The VEI display will be ✖.

Manual Rewind

Use manual rewind to rewind the film before the current roll is finished.

1. Open the control-panel door and press the manual-rewind button.

2. Follow steps 1-3 from Automatic Rewind.

Processing

For best results, take your film to a certified Advanced Photo System photofinisher. See page 72.

34

35