REMOTE-CONTROL (optional)

Changing the Battery

The remote control uses a 3V lithium battery (CR2032). When pressing the remote-control buttons does not release the camera’s shutter, the battery must be replaced.

1. Pull out the battery chamber and remove the old battery.

2. Insert a new battery into the battery chamber with its plus side up.

3. Slide the battery chamber back into the remote control.

AF ILLUMINATOR

The AF Illuminator is a secondary function of the built-in flash. When the scene is too dark for the camera to focus accurately, the built-in flash fires a few short bursts before and after the lens is focused to provide the illumination necessary for the camera to focus on your subject. If it will interfere with your subject or is inappropriate, the AF Illuminator can be canceled.

•The range of the AF Illuminator flash is approximately 0.6 - 5.0m (2.0 - 16.4 ft.)

•The AF Illuminator will not fire in Sports Mode.

Canceling the AF Illuminator

1. Press the flash-mode and exposure-compensation buttons at the same time.

• on AL appears in the data panel.

2. Press the exposure- compensation button.

• oFF AL appears in the data panel.

•Press the shutter-release button partway down to return to the normal data-panel display.

•Repeat the procedure to turn the AF Illuminator back on.

62

63