S MODE - SHUTTER PRIORITY

In S mode, you select the shutter speed and the camera automatically sets the aperture required for proper exposure. Use S mode when you want to control the blur caused by subject movement.

1. Open the control-panel door.

2. Press the exposure-mode button until S appears in the data panel.

3. Turn the control dial to select the shutter speed.

• Press the program-reset button to return to fully automatic operation.

•If the aperture display in the data panel blinks, the required setting is outside the aperture

range of the lens. Turn the control dial until the blinking stops.

•The number 60, or 125, displayed in the data panel stands for 1/60th or 1/125th of a second.

S Mode Flash

When the built-in flash is up, it will fire each time a picture is taken. When the built-in flash is down, it will not fire.

Press the flash-mode button to turn the flash on.

• Flash operation in the S mode is the same as P mode. The camera automatically sets the aperture and the shutter speed.

To cancel the flash, push the flash down.

48

49