CARE AND STORAGE

Cleaning

• If the camera or lens barrel is dirty, wipe it gently with a soft, clean, dry cloth. If the camera or lens comes in contact with sand, gently blow away loose particles - wiping may scratch the surface.

To clean the lens surface, first brush away any dust or sand then, if necessary, moisten a lens tissue with lens cleaning fluid and gently wipe the lens in a circular motion, starting from the center.

Never place lens fluid directly on the lens.

Never touch the interior of the camera, especially the shutter and mirror, doing so may impair their alignment and movement. Dust on the mirror will not affect the picture quality.

Never use compressed air to clean the camera’s interior, it may cause damage to sensitive interior parts.

Never use organic solvents to clean the camera.

Never touch the lens surface with your

fingers.

Storage

When storing your camera for extended periods,

Always attach the protective caps.

Store in a cool, dry, and well-ventilated area away from dust and chemicals such as moth balls. For long periods, place the camera in an airtight container with a silica gel drying agent.

Periodically release the camera’s shutter to keep it operating properly.

Before using after prolonged storage, check the camera’s operation to make sure it is functioning properly.

Before Important Events

Check the camera’s operation carefully, or take test photographs.

Minolta is not responsible for any loss that may occur due to an equipment malfunction.

Questions and Service

If you have questions about your camera, contact your local camera dealer or write to the Minolta distributor in your area.

Before shipping your camera for repair, please contact an authorized Minolta Service Facility for details.

This mark certifies that this product meets the requirements of the EU (European Union) concerning interference causing equipment regulations. CE stands for Conformité Européenne (European Conformity).

76

77