SETTING THE DATE AND TIME
RECORDING MODE - BASIC OPERATION
1
Set date and time.
YesNo
After initially inserting a memory card and a battery, the camera’s clock and calendar must be set. When images are recorded, the image data is saved with the date and time of recording.
If the clock and calendar have not been set, a message may be displayed for a few seconds each time the camera is turned on. This message is also displayed if the clock and calendar reset when the camera is stored without a battery for a long period.
When the message is displayed, use the left and right keys of the controller (1) to select “Yes.” “No” cancels the operation.
Press the center of the controller to open the date/time setup screen.
This section covers basic recording operation. To prepare the camera for use, read pages 14 through 22.
HANDLING THE CAMERA
While using the LCD monitor, grip the camera firmly with your right hand while supporting the camera body with your left. Keep your elbows at your side and your feet
When taking vertical pictures, hold the camera so that the flash is above the lens with the
SETTING THE CAMERA TO RECORD IMAGES
If the message is not displayed, the date/time setup screen can be opened in section 3 of the setup menu. See page 73 and 74 on how to open and navigate the menu.
Slide the
Date/Time set
01 . 01. 2005
00 : 00
:move 
:sel. 
:enter
Date/Time setup screen
On the setup screen, use the left and right keys to select the item to be changed.
Use the up and down keys to adjust the item.
Press the center button to set the clock and calen- dar.
Digital Subject Programs (p. 31).
Movie and audio recording (p. 36, 52).
For customers in certain areas, the menu language must also be set. The language is changed in section 1 of the setup menu (p. 73).
22 Getting up and running
23