INSTALLING AND REMOVING A MEMORY CARD

An SD Memory Card or MultiMediaCard must be inserted for the camera to operate. If a card has not been inserted, a no-card warning is displayed on the monitor. For more about memory cards, see page 108.

Always turn off the camera and confirm the indicator lamp is not lit before changing the memory card, otherwise the card may be damaged, and data lost.

1

2

1. Slide the card-chamber door toward the front of

the camera to release the safety catch; the door

springs open.

2. Insert the memory card all the way into the card slot and then release. The card should catch in the slot.

Insert the card so the face is toward the back of the camera. Always push the card in straight, never at an angle. Never force the card. If the card does not fit, check that it is orientated cor- rectly. If a MultiMediaCard is inserted incorrect- ly, it will lock, but the card chamber door will not close.

3

3. To eject a memory card, press the card into the slot and release. The card can now be pulled out.

4. Close the card-chamber door and slide it toward the camera to engage the safety catch.

Images can be taken without a card. Depending on the file size, one or more images can be stored temporarily and played back once. These images cannot be transfered or saved.

TURNING THE CAMERA ON

To turn the camera on, press the main switch. When the camera is initially turned on, the date and time need to be set, see the following page.

Press the main switch again to turn off the camera. Always store and transport the camera off.

20 Getting up and running

21