

• Do not use or store these products in a hot or humid environment such as the glove compartment |
or trunk of a car. It may damage the camera, cradle, and battery which may result in burns or |
injuries caused by heat, fire, explosion, or leaking battery fluid. |
• If the battery is leaking, discontinue use of the product. |
• The camera, cradle, and battery temperature rises with extended periods of use. Care should be |
taken to avoid burns. |
• Burns may result if the memory card or battery is removed immediately after extended periods of |
use. Turn the camera off and wait for it to cool. |
The following marks may be found on the product:
This mark on your camera certifies that this camera meets the requirements of the EU (European Union) concerning interference causing equipment regulations. CE stands for Conformité Européenne (European Conformity).
This Class B digital apparatus complies with Canadian
FCC Compliance Statement
• Do not fire the flash while it is in contact with people or objects. The flash unit discharges a large |
Declaration on Conformity
Digital Camera: DiMAGE X1
amount of energy which may cause burns. |
• Do not apply pressure to the LCD monitor. A damaged monitor may cause injury, and the liquid |
from the monitor may cause inflammation. If liquid from the monitor makes contact with skin, |
wash the area with fresh water. If liquid from the monitor comes in contact with the eyes, immedi- |
ately rinse the eyes with plenty of water and contact a doctor. |
• When using the AC adapter and cradle, insert the plug securely into the electrical outlet. |
• Do not use electronic transformers or travel adapters with the cradle. The use of these devices |
may cause a fire or damage the product. |
• Do not use if the AC adapter or cradle cord is damaged. |
• Do not cover the AC adapter or cradle. A fire may result. |
• Do not obstruct access to the AC adapter or cradle; this can hinder the unplugging of the units in |
emergencies. |
• Unplug the AC adapter or cradle when cleaning or not in use. |
| Tested To Comply |
Responsible Party: Konica Minolta Photo Imaging USA Inc. | With FCC Standards |
| |
Address: 725 Darlington Avenue, Mahwah, NJ 07430 | FOR HOME OR OFFICE USE |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con- ditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Do not remove the ferrite cores from the cables.
6 | For proper and safe use | 7 |