AUTO RESET
When auto reset is active, the following functions reset when the camera is turned off. This function can be turned off in section 1 of the setup menu (p. 73).
AUDIO SIGNALS
Every time a button is pressed, an audio signal gives a positive confirmation of the operation. The audio signals can be turned off in section 2 of the setup menu (p. 73). Two audio signals are avail-
Audio signals | 1 |
Focus signal | 1 |
Shutter FX | 1 |
Flash mode (p. 28) | Autoflash | |
Monitor display (p. 30) | Full display | |
|
|
|
AF area (p. 32) | Wide focus frame | |
Drive mode (p. 40) | ||
|
|
|
White balance (p. 46) | Auto | |
Exposure | ||
|
|
|
Camera sensitivity (p. 48) | Auto | |
Metering mode (p. 49) | ||
|
| |
Exposure compensation (p. 50) | 0.0 | |
Hibright LCD (p. 52) | Off | |
Color mode (p. 52) | Color | |
Sharpness (p. 53) | Normal | |
|
|
|
Contrast (p. 54) |
| Normal |
|
|
|
The flash mode is reset to aut- oflash or autoflash with red eye reduction depending on which of those two flash modes were last used.
able.
Volume | 2 |
Power save | 3 min. |
FOCUS SIGNAL
When the
SHUTTER FX
When the shutter is released, a shutter sound effect will give a positive confirmation of the opera- tion. The sound effect can be changed or turned off in section 2 of the setup menu (p. 73). Two shutter effects are available.
LANGUAGE
The language used in the menus can be changed. The language is selected in section 1 of the setup menu (p. 73).
76 Setup mode
VOLUME
The volume of the audio signals and shutter FX can be increased or decreased in section 2 of the setup menu (p. 73). This affects the camera’s audio signals only and will not change the playback levels of an audio track.
AUTO POWER SAVE
To conserve battery power, the camera shuts down if an operation is not made within a certain peri- od. To restore power, press any button. The length of the
77