TRANSFER MODE

The transfer mode must be specified depending on how the camera is to be used with a computer or printer. Two transfer-mode options are available in section 4 of the setup menu (p. 73):

To transfer data between the camera and computer. This option must be

Data storage selected when moving image files to the computer, or using the camera with the Kodak EasyShare or DiMAGE Master Lite software.

PictBridge To print images with a PictBridge compatible printer.

For more on these options, refer to the data-transfer section of the manual.

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. The DiMAGE manuals do not cover the basic operation of computers or their operating systems; please refer to the manual supplied with your computer.

SYSTEM REQUIREMENTS

For the camera to be connected directly to the computer and used as a mass-storage device, the computer must be equipped with a USB port as a standard interface. The computer and the operating system must be guaranteed by their manufacturers to support USB interface. The following operating systems are compatible with the camera:

Windows 98, 98SE, Me, 2000 Professional, and XP Home and Professional editions.

FIRMWARE VERSION

The camera firmware version can be verified in section 4 of the setup menu (p. 73). Firmware is the software that runs the camera. Select the menu option to display the firmware version. Press the center button of the controller to close the window.

DiMAGE X1

Ver. 1.00

OK

Mac OS 9.0 ~ 9.2.2 and Mac OS X 10.1.3 - 10.1.5, 10.2.1 ~ 10.2.8, 10.3 ~10.3.9, 10.4 ~ 10.4.1

Check the Konica Minolta web site for the latest compatibility information:

North America: http://kmpi.konicaminolta.us/

Europe:http://www.konicaminoltasupport.com/

USB 2.0 data-transfer speed is full-speed mode (12Mbps); high-speed mode (480Mbps) is not avail- able.

Users with Windows 98 or 98 Second Edition will need to install the driver software on the included Digital Camera Software CD-ROM (p. 85). No special driver software is required for other Windows or Macintosh operating systems.

Customers who have bought a previous Konica Minolta DiMAGE or SLR digital camera and have installed the Windows 98 driver software must repeat the installation procedure. The updated version of the driver software included on the supplied Digital Camera Software CD-ROM is required for the operation of the DiMAGE X1 with a computer. The new software has no affect on the performance of the older cameras.

82 Setup mode

83