INDEX PLAYBACK

RECORDING - ADVANCED OPERATION

To view the recorded images in a 6-frame index, press the left side of the zoom lever (W).

In index playback, the left/right and up/down keys of the controller move the yellow border around the index

thumbnails. When the image is highlighted with the bor- der, the date of recording, audio-track indicator, the lock

and printing status, e-mail copy indicator and the frame number of the image are displayed at the bottom of the

screen. The accompanying audio track of the highlighted image can be played by pressing the center button of the controller. When the right side of the zoom lever (T) is pressed, the highlighted image is displayed in the single-frame playback mode.

1

MOVIE RECORDING

This camera can record digital video with sound. Simply slide the recording-mode switch to the movie/audio recording position (1). The frame counter shows the total recording time for the next movie clip. Total recording time varies with the movie file size, see page 59. Some changes can be made with the movie/audio menu (p. 39).

Frame the subject and press the shutter-release button all the way down and release to begin recording (2). A digital zoom is available during recording. Both digital zoom and optical zoom can be turned on or off in section 1 of the movie/audio menu (p. 55, 59).

PLAYBACK ON THE CRADLE

Images can be played back with the camera in the cradle. Turn the camera off and place the camera in the cradle; see page 17 for details.

With the camera in the cradle, turn the camera on; charging stops and images can be viewed as described in the playback section. Pictures cannot be taken; only playback mode is avail- able.

If the cradle is plugged into a live electrical outlet, it will power the camera. If the cradle is unplugged, the camera battery is used as the power source.

Always turn off the camera before removing it from the cradle.

36 Playback - basic operation

Microphone

The camera continues to record until the recording time

is used or the shutter-release button is pressed again.

2

When recording, the frame counter displays the remain-

ing time. During the last ten seconds, the counter turns

 

red.

Take care not to cover the microphone while recording. Very bright light sources in the scene may cause streaks to appear on the image. Black areas caused by data loss may also be apparent.

Image size

Anti-Shake indicator (p. 47)

Recording indicator

Remaining time

37