Pictures are not sharp.

Subject is too close.

Focus signal is

red.

A special situation is preventing the autofocus system from focusing (p. 27).

Make sure the subject is within the autofocus range (p. 26) or use the macro mode (p. 30).

Use the focus-lock function to focus on an object at the same distance as the subject (p. 26).

While using flash, the pictures are too dark.

Pictures are

 

Use a tripod, change the camera

taken indoors

Slow shutter speeds result

or in low-light

in blurred images when

sensitivity to a higher setting (p.

situations with- the camera is hand-held.

46), or use the flash (p. 28).

out flash.

 

The subject is beyond the flash range

Move closer to the subject or

change the camera sensitivity to

(p. 46).

a higher setting (p. 46).

 

If the camera does not function normally, turn it off, remove and reinsert the battery, or unplug and reconnect the AC adapter set. Always turn the camera off using the main switch otherwise the memory card may be damaged and camera settings reset.

ABOUT THE LITHIUM-ION BATTERY CHARGER CORD

The included AC cord is designed for the current of the sales region. Only use the cord in the region it was purchased.

Region

Product code

Continental Europe, China, Korea, Singapore (220-240V)

APC-110

Great Britain, Hong Kong (220V-240V)

APC-120

United States, Canada, Taiwan (110V-120V)

APC-130

Japan (100V)

APC-140

101