CONNECTING TO WINDOWS 98 AND 98SE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be installed manually with the operating system’s add-new-hardware wizard; see the instructions on the following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver software is required for other Windows operating systems.
Automatic Installation
Before connecting the camera to the com- puter, place the DiMAGE Viewer CD-ROM in the CD-ROM drive. The DiMAGE installer menu should automatically acti- vate. To automatically install the Windows 98 USB driver, click on the “Starting up the USB device driver installer” button. A window appears to confirm that the driver should be installed; click “Yes” to contin- ue.
A message appears when the driver has been successfully installed. Click “OK.” Restart the computer before connecting the camera (p. 80).
81 