EFFECT PARAMETER LIST

1. COMPRESSOR [COMPRESSOR]

This is a limiter effect which suppresses the high level attack transients of an input signal sound by compressing that signal. This effect helps emphasize the attack sound or lengthen the sustain sound by raising the level as a sound decays.

Parameters:

A

SENS (SENS)

[0-15]

Degree of the compressor effect. The larger this

 

 

 

value, the greater the sustain or the attack is

 

 

 

emphasized.

 

 

 

 

B

ATTACK (ATTACK)

[0-7]

Speed of the attack. The higher this value, the faster

 

 

 

the attack.

 

 

 

 

E

LEVEL (LEVEL)

[0-15]

Output level of the effect sound.

 

 

 

 

* APPLICATION NOTE:

"Set different SENS values for the types of guitar you are playlng!"

The degree of the Compressor effect varies according to the amount of the input signal. Set smaller values, for the SENS parameter, when playing a guitar with hum-bucking type pickups that produce a high output level. For a guitar with single-coil pickup, set larger values.

2. DISTORTION/OVERDRIVE [DIST/OD]

This creates a typical distortion effect. There are two types of distortions available. The Distortion is a high gain "fuzz"-type effect, and the Overdrive is a mild saturation effect.

Parameters:

A

MODE (MODE)

[1-2]

1. Distortion

 

 

 

2 Overdrive

 

 

 

 

B

DRIVE (DRIVE)

[0-15]

Amount of distortion or gain.

 

 

 

 

C

TONE (TONE)

[0-15]

Tone of the effect sound. The larger this value, the

 

 

 

brighter the effect sound

 

 

 

 

E

LEVEL (LEVEL)

[0-15]

Output level of the effect sound.

 

 

 

 

* APPLICATION NOTE:

To obtain a Metal type distortion ..."

Turn up the TONE slightly and raise the DRIVE parameter. This makes the amount of distortion larger, creating a harder edge distortion.

See www.hgroenewegen.tmfweb.nl for more

20 sept. 2003

Pg 10