Korg A5, Guitar Performance Signal Processor SAVING EFFECTS, [PROGRAM WRITE]

SAVING EFFECTS

[PROGRAM WRITE]

When you wish to keep the programs you have edited, use the Program Write function to save them into the user area. In the A5 GUITAR, Bank 1 is the user area which stores up to 5 edited effect programs.

Unless you use this function to save the data, the programs you have edited wiII be erased as soon as you select another program.

NOTE Saving a program into a particular program number in Bank 1 wiII erase the current program data In that number. (Upon leaving the KORG factory five programs were selected from Bank 2 6 and copied to Bank 1.)

PROGRAM

Write the program as a separate program.

EDITS

1 When editing is completed in the Edit mode, press the Write key to save the currently edited program, For example an edited version of METAL 1 (Program number 1 in Bank 2) Is saved as a separate program.

Upon pressing the Write key, the Bank/Value display flashes "1", indicating that the currently edited program is ready to be stored to Bank 1 (the user area).

2 Press one of five EFCT/PROG switches (1 - 5), to select a particular program number in Bank 1 to which you wish to store the edited program. In the next example the edited program is saved to the program 3 in Bank 1.

3 Press the Write key once again. When writing operation is finished both Mode LED's light up for about a second.

Both Mode LEDs light up for about a second to indicate that the writing operation is completed.

*To cancel the write operation press the Mode select switch instead of pressing the Write key.

The Write function can be accessed directly from the Program mode, also.

See www.hgroenewegen.tmfweb.nl for more 20 sept. 2003 Pg 8