PLAYING PRESET PROGRAMS
[PROGRAM MODE]
About Preset Programs
The A5 GUITAR has a total of 30 effect programs stored in 6 banks. Each bank holds 5 effect programs. Banks
BANK 1 PROGRAM 1 PROGRAM 2 PROGRAM 3 PROGRAM 4 PROGRAM 5
BANK 2 PROGRAM 1 PROGRAM 2 PROGRAM 3 PROGRAM 4 PROGRAM 5
BANK 3 PROGRAM 1 PROGRAM 2 PROGRAM 3 PROGRAM 4 PROGRAM 5
BANK 4 PROGRAM 1 PROGRAM 2 PROGRAM 3 PROGRAM 4 PROGRAM 5
BANK 5 PROGRAM 1 PROGRAM 2 PROGRAM 3 PROGRAM 4 PROGRAM 5
BANK 6 PROGRAM 1 PROGRAM 2 PROGRAM 3 PROGRAM 4 PROGRAM 5
USER Area
(This area can store edited
PRESET Area
(This area cannot store edited
1 When the power Is first turned on, the
A5 GUITAR automatically enters into the Program mode. To switch to the Program mode from the Manual Edit mode simply press the Mode Select Switch.
Press the switch until the
PROG LED lights red.
2 Set the input level while playing the guitar, carefully raise the input level until the Peak Indicator occasionally but not constantly, lights up.
3 Switch the Bank/Effect Selector to the bank that contains a program you wish to play (For parameters within each program refer to the attached Effect Parameter List).
Bank 2 is selected in the figure below, for example.
The currently selected bank number is shown In the Bank/Value Display.
4 Press any of the EFCT/PROG switches (1 5) to select the effect program you wish to play. For example program 1 containing METAL 1 is selected in the figure below.
Program 1 in Bank 2 "METAL 1" is selected.
5 Play the guitar to hear the effect sound with "METAL 1". To hear the unprocessed sound without effects, press the Bypass key.
6 Repeat the above procedures (3 thru 5) for selecting programs in other banks. To continue selecting programs in the same bank simply press the EFCT/PROG switches.
NOTE Shifting to a different bank does not select programs in that bank immediately. To select programs in a new bank you must press one of the 5 EFCT/PROG switches after entering the new bank.
See www.hgroenewegen.tmfweb.nl for more | 20 sept. 2003 | Pg 4 |
|
|
|