NAMES AND FUNCTIONS OF CONTROLS AND TERMINALS

FRONT PANEL

Input Level

This controls the volume of Input signal received from the input jack

Peak Indicator

For visual monitoring of the Input level while making adjustments. Adjust the input level so that the Peak Indicator occasionally but not constantly lights up.

Bank/Effect Selector

This Sliding switch is used to select banks while the A5 GUITAR is in the Program mode (page 4) or select the effects to be edited while in the edit mode.

Bank number

Effect names

Output Level

This controls the volume of the output signal.

Write Key

This executes saving of edited data.

Bank/Value Display

This Indicates the A5 GUITAR 's bank number while in the Program mode (page 4) or the value of parameters while in the Edit mode (page 8).

Effect names

Bypass Key

Pressing this key toggles the bypass function ON/OFF. While the bypass is ON The A5 GUITAR sends unprocessed sound to the output terminal.

Mode Led

These LED's light up in red to show the chosen mode: Program mode or Edit mode.

Mode List

EFCT/PROG LED

Theses LED's light up in red to show the chosen program number while in the Program mode ( page 4). While in the Edit mode (page 6) these LED's light up in red to show the effects that are turned ON.

Parameter Editor

The value of each effect parameter can be changed by rotating this control in the Edit mode (page 6).

EFCT/PROG Switches

These switches are used to select the program number while in the Progaram mode (page 1) or to toggle the individual effects ON/OFF while in the Edit mode (page 6).

Mode Select Switch

This switch toggles between the Program mode and the Edit mode.

REAR PANEL

VOLUME Pedal Jack

For connection to the outpul jack of optional volume pedal KORG KVP - 001 (When using a KVP - 001 set its minimum volume at 0).

OUTPUT Jacks (R L/MONO)

These jacks provide stereo output for amplifiers, mixers etc. The L/MONO jack when used alone provides mixed output for monaural equipment.

DC 9V Jack

This Jack is for the 9 - volt AC adaptor.

 

 

 

 

PHONES jack

 

 

INPUT jack

This jack is for stereo monitoring

 

For connecting the guitar.

ot the A5 GUITAR output.

 

 

 

 

 

 

POWER switch

This switch turns the A5 on and off. Allways make sure that this switch is at the OFF position before connecting or disconnecting the AC adaptor either to the A5 GUITAR or an electrical outlet.

See www.hgroenewegen.tmfweb.nl for more

20 sept. 2003

Pg 2