When you enter this mode, the recording mode se- lect screen will appear, and the Phrase Trainer mode icon will blink. In this screen, the PANDORA PX3B will be ready to record.
Here you can select the recording mode (AUX S: AUX high sound quality, AUX L: AUX long record- ing, BAS S: bass INPUT high sound quality, BAS L: bass INPUT long recording).
For AUX S or BAS S, you can record up to 8 sec- onds. For AUX L or BAS L, you can record up to 16 seconds. Select the setting appropriate for the phrase you wish to record.
•Value dial: Select the recording mode
•[ 
] button: Begin recording
Start playback on your CD or other audio source, and at the point where you wish to begin recording, press the [ 
] button. Recording will begin.
Once you record a phrase, it is not possible to change the recording mode. If you wish to change the recording mode, you must first exit to another mode, and once then
2. Recording
When you press the [ 
] button to begin recording, the recording time will be shown as a numerical value and in the value display.
recording time display
When you wish to stop recording, press the [ 
] button or the [
] button.
When recording ends, loop playback will begin au- tomatically.
Unless you manually stop recording, recording will continue as long as permitted for the selected re- cording mode. (8 or 16 seconds).
The phrase will be recorded and played back in mono.
•[ 
] button/[
] button: End recording and begin playback
28
