Korg PX3B manual Try it out, Set the volume control of your bass to its usual settings

Try it out

1When you finish making connections, set the power switch in the “ON” position. (This set- ting is referred to as Play mode.)

Use the +/– buttons to select a program. Se- lect a clean-type program that will be suitable for setting the volume. (As an example here, we will select Program 1 “M’ M”.)

Program number

Program name

2Set the input level switch accordingly to the output level of your bass.

Input level switch

Hi: High-output basses (active pickups)

Lo: Low-output basses (passive pickups)

3Set the volume control of your bass to its usual settings.

Use the Value dial to adjust the master level.

Value dial

Master level

19