SETUP
LOCK SETUP
•When you open the LOCK setup page, you will see the following picture:
|
| LOCK |
| |
|
|
|
|
|
| Rating |
| Unlock |
|
| Password |
| New |
|
| Country Code |
| US |
|
|
|
|
|
|
Move 
Select
•“Rating” is used to set the parent control level.
LOCK
| Unlock | |
Rating | ||
Password | 8 | (Adult) |
7 |
| |
Country Code |
| |
6 |
| |
| 5 |
|
| 4 |
|
| 3 |
|
| 2 |
|
| 1 | (Kids) |
|
|
|
Prev. 
Move 
Select
•When you enter into this item, the system will require you to input the password, only the password is correct, can you be permitted to change the parent lock level. Then you must input the password “3351”.
•If you find it wrong in the course of inputting the password, press CLEAR button to clear the inputted character.
•When you input the correct password,
you can use
/
buttons to change the parent level. Provided are 9 levels including 1~8 and unlock.
•Regarding to the levels, please refer to the “PARENT CONTROL”. (Pg.19)
•When you complete the set in the setup, you must eject/load the disc from the disc slot, and then the function will come into effect.
•“Password” setup is used to set the new password or change the old password; before you enter into this item, the system will require you to input the old password, only when the password is correct, can you be permitted to change the password.
•“Country Code” is used to set the country code. The code information standing for original producing area country will be
written in every DVD disc when it is produced. There are two characters standing for the name of the country. For example, CN for China, CA for Canada, and so on. Only when the country code you set in the SETUP menu matches with the disc’s own country code, the parent level that you set will come into effect. The detail operation is:
•When you first set this item, it will display “NEW” and require you to input a new password, then input the password again to confirm it.
•Then the first character of the country
code will be selected, you can use 
/
buttons to select upward or downward to confirm the first character;
•When you confirm the first character, the second character will change into all the characters that may match with the first character to stand for the corresponding country code;
•Then use 
/ 
buttons to select the second character;
•Press ENTER or OK button to confirm the setting for country code.
Note:
If you have set a password in “Rating” and “Password”, when you set the country code, it will require you to input the password. Only when the password is correct, can you be permitted to change the country code. If you select “Load Default” in SETUP menu, the password you have set will be cleared.
OTHERS SETUP
•When you enter into the OTHERS setup page, you will see the following picture. You can change the setting for Load Default and Screen Saver.
|
| OTHERS |
| |
|
|
|
|
|
| Load Defaultl |
| Select |
|
| Screen Saver |
| On |
|
|
|
|
|
|
Move 
Select
•“Load Default” is used to revert to factory initial settings.
•“Screen Saver” is used to switch on/off the screen saver function.
21
