Manuals / Alliance Laundry Systems / Home Audio / Speaker

Alliance Laundry Systems 9001889R7 manual Programming, Setup of the Machine

Models: 9001889R7

1 62

Download 62 pages 8.61 Kb

Page 6

Programming

Programming

Setup of the Machine

RUN	PROGRAM	Turn key from Run to Program

Program Cycle 00

To go to the main setup of the machine, press “Auxiliary”, “2”, “9”.

System Program

_X18PV

System Program

_X25PV

Units: English

Units: Metric

Drain 1 : Valve

Drain 2 : None

Drain 1 : Pump

Drain 2 : None

To change the machine type, press the “Advance” button.

The following types are possible:

_X18PV _X40PV _X135PV

_X25PV _X55PV _X165PV

_X33PV _X75PV _X200PV

Press the “Advance” button until the right type of machine is selected. Press the “Enter” button.

Select the desired units.

NOTE: English means level in inch and temperature in °F.

Metric means level in cm and temperature in °C.

Press the “Advance” button to change the units.

Press the “Enter” button.

Select the type of drain valve.

Press “1” to change drain 1 to pump or valve. Press “2” to change drain 2 to pump, valve or none.

4

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001889

Image 6

Alliance Laundry Systems 9001889R7 manual Programming, Setup of the Machine

Contents

Cabinet Freestanding Washer-ExtractorsProgramming WE-8ComputerPage W030 Table of Contents Introduction Model IdentificationSetup of the Machine ProgrammingPress the “Enter” button to select options Select between 1 to 9 cm or inches Version of Control Program Storing ModeLanguage on Display Version 1.15 and later ONLY Explanation of the Step Functions NOTE If a fill error occurs, then machine hasFill Example Fill to low level and 95F step time limit Wash SupplyChemical Hold Feature Wash 5 Thermal Cool-DownSoak Spin DrainExample Making a New Program Warm ProgrammingStep 01 Cycle SupplyStep 03 Cycle Programming9001889 HeatStep 06 Cycle 51 Spin Step 06 Cycle 51 0 min ProgrammingStep 06 Cycle Step 06 Cycle 51 Spin Step 06 Cycle 51 8 min 30 secEdit a Cycle Change a Complete StepPress “Enter” to confirm Changing the Time of a Step Step 02 Cycle 51 6 min 20 sec ProgrammingStep 02 Cycle 51 6 min 00 sec Step 03 CycleDelete a Step Insert a Step Press “Enter” to confirm Program Cycle Delete a CycleProgramming Erase CycleProgram Cycle Enter to reload earlier settings Reloading Previous SettingsPress “Enter” to confirm the settings Press “Auxiliary”, “3”, “0”Cycle Count Reading Cycle CountCalibration of the Machine Speed Calibration Pre-ProgrammedCycles Hot Fill to Low Level Hot Fill to Low Level Warm Fill to High Level Description Pre-ProgrammedCycles Cycle Towels Heavy SoilStep Min secWarm Fill to High Level 32F Fill to High Level 110F Fill to High Level Step Pre-ProgrammedCycles CycleHealth Care Personal Bleach Description110F Fill to Low Level Description Pre-ProgrammedCycles Cycle Table Linen No IronStep Min secDescription Cycle Table Color No IronStep Min secDescription Pre-ProgrammedCycles Cycle Visa No IronStep Min secDescription Cycle Visa Color No IronStep Min secDescription Pre-ProgrammedCycles Cycle Shirt Bleach StarchStep Min secDescription Cycle Shirt DelicateStep Min secDescription Pre-ProgrammedCycles Cycle Uniforms BleachStep Min secDescription Cycle Rags Heavy SoilStep Min secStep Cycle Supply SetupPre-ProgrammedCycles Cycle Rewash/Reclaim DescriptionCold Fill to High Level Description Pre-ProgrammedCycles Cycle Energy HotStep Min secCold Fill to Low Level Warm Fill to Low Level Description Cycle Gentle ColdStep Min secDescription Pre-ProgrammedCycles Cycle Perm Press 60CStep Min secCold Fill to High Level Name Inverter Drive Error CodesOperation Description and NOTESOperation Inverter Drive Error CodesNote Resetting the inverter initializes NameName Inverter Drive Error CodesOperation Description and NOTESName Inverter Drive Error CodesOperation Description and NOTES