If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance.

Serial-type fax setup

For information on setting up the printer for faxing using a serial-type phone system, see the Fax Configuration Web site for your country/region.

Austria

www.hp.com/at/faxconfig

Germany

www.hp.com/de/faxconfig

Switzerland (French)

www.hp.com/ch/fr/faxconfig

Switzerland (German)

www.hp.com/ch/de/faxconfig

United Kingdom

www.hp.com/uk/faxconfig

Finland

www.hp.fi/faxconfig

Denmark

www.hp.dk/faxconfig

Sweden

www.hp.se/faxconfig

Norway

www.hp.no/faxconfig

Netherlands

www.hp.nl/faxconfig

Belgium (Dutch)

www.hp.be/nl/faxconfig

Belgium (French)

www.hp.be/fr/faxconfig

Portugal

www.hp.pt/faxconfig

Spain

www.hp.es/faxconfig

France

www.hp.com/fr/faxconfig

Ireland

www.hp.com/ie/faxconfig

Italy

www.hp.com/it/faxconfig

 

 

Test fax setup

You can test your fax setup to check the status of the printer and to make sure it is set up correctly for faxing. Perform this test after you have completed setting up the printer for faxing. The test does the following:

Tests the fax hardware

Verifies the correct type of phone cord is connected to the printer

Checks that the phone cord is plugged into the correct port

Checks for a dial tone

Checks for an active phone line

Tests the status of your phone line connection

Test fax setup

213

Page 217
Image 217
HP Pro 8500A Plus - A910g, Pro 8500A - A910a, Pro 8500A Premium - A910n manual Serial-type fax setup, Test fax setup