HP Pro 8500A Plus - A910g, Pro 8500A - A910a manual Change fax settings, Delete speed-dial entries

Chapter 6

Delete speed-dial entries

To delete speed-dial entries or group speed-dial entries, complete the following steps:

1.On the printer’s control panel, touchright arrow , and then touch Setup.

2.Touch Fax Setup, and then select Speed Dial Setup.

3.Touch Delete Speed Dial, touch the entry you want to delete, and then touch Yes to confirm.

NOTE: Deleting a group speed-dial entry does not delete the individual speed-dial entries.

Print a list of speed-dial entries

To print a list of all of the speed-dial entries that have been set up, complete the following steps:

1.Load paper in the tray. For more information, see Load media.

2.On the printer’s control panel, touch right arrow , and then touch Setup.

3.Touch Fax Setup, and then select Speed Dial Setup.

4.Touch Print Speed Dial List.

Change fax settings

After completing the steps in the getting started guide that came with the printer, use the following steps to change the initial settings or to configure other options for faxing.

•Configure the fax header

•Set the answer mode (Auto answer)

•Set the number of rings before answering

•Change the answer ring pattern for distinctive ring

•Set the dial type

•Set the redial options

•Set the fax speed

•Set the fax sound volume

Configure the fax header

The fax header prints your name and fax number on the top of every fax you send. HP recommends that you set up the fax header by using the HP software provided with the printer. You can also set up the fax header from the printer control panel, as described here.

NOTE: In some countries/regions, the fax header information is a legal requirement.

To set or change the fax header

1.Touch right arrow , and then select Setup.

2.Touch Fax Setup, and then select Basic Fax Setup.

3.Touch Fax Header.

72 Fax