To change speed-dial entries

1.On the printer’s control panel, touch right arrow , and then touch Setup.

2.Touch Fax Setup, and then select Speed Dial Setup.

3.Touch Add/Edit Speed Dial, and then touch the speed-dial entry you want to change.

4.If you want to change the fax number, type the new number, and then touch Next.

NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix.

5.If you want to change the name of the speed-dial entry, type the new name, and then touch Done.

Set up and change group speed-dial entries

You can store groups of fax numbers as group speed-dial entries.

To set up group speed-dial entries

NOTE: Before you can create a group speed-dial entry, you must have already created at least one speed-dial entry.

1.On the printer’s control panel, touch right arrow , and then touch Setup.

2.Touch Fax Setup, and then select Speed Dial Setup.

3.Touch Group Speed Dial, and then touch an unused entry number.

4.Touch the speed-dial entries you want to include in the group speed-dial entry, and then touch OK.

5.Type the name for the speed-dial entry, and then touch Done.

To change group speed-dial entries

1.On the printer’s control panel, touch right arrow , and then touch Setup.

2.Touch Fax Setup, and then select Speed Dial Setup.

3.Select Group Speed Dial, and then touch the entry you want to change.

4.If you want to add or remove speed-dial entries from the group, touch the speed- dial entries you want to include or those you want to remove, and then touch OK.

5.If you want to change the name of the group speed-dial, type the new name, and then touch Done.

Set up speed-dial entries

71

Page 75
Image 75
HP Pro 8500A - A910a, Pro 8500A Plus - A910g manual Set up and change group speed-dial entries, To change speed-dial entries