HP Pro 8500A - A910a manual Load transparencies, Load custom-size media, To load transparencies

Models: Pro 8500A Premium - A910n Pro 8500A - A910a Pro 8500A Plus - A910g

1 246
Download 246 pages 25.01 Kb
Page 30
Image 30

Chapter 1

5.Lower the output tray.

6.Pull out the tray extender.

Load transparencies

To load transparencies

1.Lift the output tray.

2.Slide the paper width guide out as far as possible.

NOTE: If you are loading larger sized media, pull the input tray to extend it.

3.Insert the transparencies, rough-side or print-side down, along the right of the main tray. Make sure the adhesive strip is pointing towards the back of the printer and that the stack of transparencies aligns with the right and back edges of the tray. Also, make sure the stack does not exceed the line marking in the tray.

NOTE: Do not load paper while the printer is printing.

4.Slide the media guides in the tray to adjust them for the media size that you have loaded.

5.Lower the output tray.

6.Pull out the tray extender.

Load custom-size media

To load cards and photo paper

Use these instructions to load custom-size media.

CAUTION: Use only custom-size media that is supported by the printer. For more information, see Media specifications.

26 Get started

Page 30
Image 30
HP Pro 8500A - A910a, Pro 8500A Plus - A910g manual Load transparencies, Load custom-size media, To load transparencies