Appendix G

To solve this problem, try the following solutions. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Turn the printer off and on

Solution 2: Install the ink cartridges correctly

Solution 3: Clean the electrical contacts

Solution 4: Replace the ink cartridge

Solution 1: Turn the printer off and on

Turn off the printer, and then turn it on again.

If the problem persists, try the next solution.

Solution 2: Install the ink cartridges correctly

Make sure all of the ink cartridges are properly installed:

1.Gently pull open the ink cartridge cover.

2.Remove the ink cartridge by grasping it and pulling it firmly toward you.

3.Insert the cartridge into the slot. Press firmly on the cartridge to ensure proper contact.

4.Close the ink cartridge cover and check if the error message has gone away.

If the problem persists, try the next solution.

Solution 3: Replace the ink cartridge

Replace the indicated ink cartridge. For more information, seeOrder printing supplies online.

NOTE: If your cartridge is still under warranty, contact HP support for service or replacement. For more information about ink cartridge warranty, see Ink cartridge warranty information. If the problem persists after you replace the cartridge, contact HP support. For more information, seeHP support.

Paper Mismatch

The paper size or type selected in the printer driver does not match the paper loaded in the printer. Make sure that the correct paper is loaded in the printer, and then print the document again. For more information, see Load media.

NOTE: If the paper loaded in the printer is the correct size, change the selected paper size in the printer driver, and then print the document again.

The cartridge cradle cannot move

Something is blocking the ink cartridge cradle (the part of the printer that holds the ink cartridges).

To clear the obstruction, press (the Power button) to turn off the printer, and then check the printer for jams.

For more information, see Clear jams.

Paper Jam

Paper has become jammed in the printer.

Before you try to clear the jam, check the following:

Make sure that you have loaded paper that meets specifications and is not wrinkled, folded, or damaged. For more information, see Media specifications.

Make sure that the printer is clean. For more information, see Maintain the printer.

Make sure that the trays are loaded correctly and are not too full. For more information, see Load media.

230 Errors (Windows)