Appendix C

The printer prints a report with the results of the test. If the test fails, review the report for information on how to fix the problem and rerun the test.

To test fax setup via the printer control panel

1.Set up the printer for faxing according to your particular home or office setup instructions.

2.Make sure the ink cartridges are installed, and that full-size paper is loaded in the input tray before starting the test.

3.From the printer control panel, touch right arrow , and then select Setup.

4.Select Tools, and then select Run Fax Test.

The printer displays the status of the test on the display and prints a report.

5.Review the report.

If the test passes and you are still having problems faxing, check the fax settings listed in the report to verify the settings are correct. A blank or incorrect fax setting can cause problems faxing.

If the test fails, review the report for more information on how to fix any problems found.

214 Additional fax setup

Page 218
Image 218
HP Pro 8500A Premium - A910n, Pro 8500A - A910a, Pro 8500A Plus - A910g To test fax setup via the printer control panel