8Work with ink cartridges

To ensure the best print quality from the printer, you need to perform some simple maintenance procedures. This section provides guidelines for handling the ink cartridges, instructions for replacing the ink cartridges, and aligning and cleaning the printhead.

This section contains the following topics:

•Information on ink cartridges and the printheads

•Check the estimated ink levels

•Replace the ink cartridges

•Store printing supplies

Information on ink cartridges and the printheads

The following tips help maintain HP ink cartridges and ensure consistent print quality.

•The instructions in this user guide are for replacing ink cartridges, and are not intended for first time installation.

•If you need to replace an ink cartridge, wait until you have the new ink cartridge available to install before removing the old cartridge.

CAUTION: Wait until you have a new ink cartridge available before removing the old ink cartridge. Do not leave the ink cartridge outside of the printer for an extended period of time.

•Keep all ink cartridges in the original sealed packages until they are needed.

•Store ink cartridges in the same orientation packages hang on store shelves or, if out of box, with label facing down.

•Be sure to turn off the printer properly. For more information, see Turn the printer off.

•Store ink cartridges at room temperature (15-35° C or 59-95° F).

•You do not need to replace the cartridges until you are prompted by the printer.

•A significant decrease in print quality might be caused by a clogged printhead. Possible solutions include cleaning the printheads. Cleaning the printheads uses some ink.

•Do not clean the printheads unnecessarily. This wastes ink and shortens the life of the cartridges.

•Handle ink cartridges carefully. Dropping, jarring, or rough handling during installation can cause temporary printing problems.

•If you are transporting the printer, do the following to prevent ink leaking from the printer or other damage from occurring to the printer:

ƕMake sure you turn off the printer by pressing (Power) button. The printhead assembly should be parked on the right side of the printer, in the service station. For more information, see Turn the printer off.

ƕMake sure you leave the ink cartridges and printheads installed.

ƕThe printer must be transported sitting flat; it should not be placed on its side, back, front, or top.

Work with ink cartridges

83