Chapter 9
To enable the correct time to be reported on faxes during Daylight Savings Time, use the EWS to manually change the time zone used by the printer to one that reflects the correct time:
ƕOpen a supported Web browser (such as Microsoft Internet Explorer, Opera, Mozilla Firefox, or Safari) on your computer.
ƕType the IP address that has been assigned to printer.
For example, if you are using an IPv4 network environment and the IP address is 123.123.123.123, type the following address into the Web browser: http://123.123.123.123
If you are using an
The EWS page appears in the Web browser window.
For more information about using the EWS, see Embedded Web server.
ƕClick the Settings tab, and then, under Preferences, click Time Zone.
ƕSelect the time zone that corresponds to the correct time (typically a time zone that is one hour ahead of yours).
NOTE: When your country/region returns to Standard Time, change the time zone to reflect your time zone.
Solve memory device problems
If the following topics do not help, see HP support for information about HP support.
NOTE: If you are starting a memory device operation from a computer, see the software Help for troubleshooting information.
•The printer cannot read the memory device
•The printer cannot read photos on the memory device
The printer cannot read the memory device•Check the memory device
ƕMake sure that the memory device is one of the supported types. For more information, see Memory device specifications.
ƕSome memory devices have a switch that controls how they can be used. Make sure that the switch is set so that the memory device can be read.
134 Solve a problem