Manuals / Alliance Laundry Systems / Home Audio / Speaker

Alliance Laundry Systems 9001889R7 manual Chemical Hold Feature, Wash 5 Thermal Cool-Down

Models: 9001889R7

1 62

Download 62 pages 8.61 Kb

Page 13

Chemical Hold Feature

Chemical Hold Feature

Chemical supply injection can be paused. Refer to Setup of Chemical Hold Feature.

Wash 5 Thermal Cool-Down

Immediately after a heat step, a temperature-controlled thermal cool-down may be programmed to prevent fiber shock from sudden cool-down.

Step XX Cycle XX

Wash

Thermal Cool-Down is Wash 5.

Step XX Cycle XX

Wash 5

Step XX Cycle XX 0°F (or 0°C)

Enter desired temperature for load to cool down to. Three digits must be used for temperature. If Fahrenheit, the valid temperature range is 80° – 200°F. If Celcius, valid temperature range is 25° – 90°C (example: 95°F).

Step XX Cycle XX 95°F

Step XX Cycle XX 0 hours

Step XX Cycle XX 1 hours 00 min

Programming

Enter time in minutes and press “Enter” (example: 5 min).

Step XX Cycle XX 1 hours 05 min

The “Heat” button is number 5.

Example: Heat up to 140°F with the time limit of 45 minutes.

Step XX Cycle XX

Heat

Step XX Cycle XX 0°F

Step XX Cycle XX 140°F

Step XX Cycle XX 0 hours

Step XX Cycle XX 0 hours 45 min

9001889

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11

Image 13

Alliance Laundry Systems 9001889R7 manual Chemical Hold Feature, Wash 5 Thermal Cool-Down

Contents

Programming Washer-ExtractorsCabinet Freestanding WE-8ComputerPage W030 Table of Contents Model Identification IntroductionProgramming Setup of the MachinePress the “Enter” button to select options Select between 1 to 9 cm or inches Program Storing Mode Version of ControlLanguage on Display Version 1.15 and later ONLY NOTE If a fill error occurs, then machine has Explanation of the Step FunctionsFill Example Fill to low level and 95F step time limit Supply WashWash 5 Thermal Cool-Down Chemical Hold FeatureSoak Drain SpinExample Making a New Program Step 01 Cycle ProgrammingWarm Supply9001889 ProgrammingStep 03 Cycle HeatStep 06 Cycle Step 06 Cycle 51 Spin ProgrammingStep 06 Cycle 51 Spin Step 06 Cycle 51 0 min Step 06 Cycle 51 8 min 30 secChange a Complete Step Edit a CyclePress “Enter” to confirm Changing the Time of a Step Step 02 Cycle 51 6 min 00 sec ProgrammingStep 02 Cycle 51 6 min 20 sec Step 03 CycleDelete a Step Insert a Step Press “Enter” to confirm Programming Delete a CycleProgram Cycle Erase CyclePress “Enter” to confirm the settings Reloading Previous SettingsProgram Cycle Enter to reload earlier settings Press “Auxiliary”, “3”, “0”Reading Cycle Count Cycle CountCalibration of the Machine Speed Calibration Pre-ProgrammedCycles Hot Fill to Low Level Hot Fill to Low Level Warm Fill to High Level Step Pre-ProgrammedCycles Cycle Towels Heavy SoilDescription Min secWarm Fill to High Level 32F Fill to High Level 110F Fill to High Level Health Care Personal Bleach Pre-ProgrammedCycles CycleStep Description110F Fill to Low Level Step Pre-ProgrammedCycles Cycle Table Linen No IronDescription Min secStep Cycle Table Color No IronDescription Min secStep Pre-ProgrammedCycles Cycle Visa No IronDescription Min secStep Cycle Visa Color No IronDescription Min secStep Pre-ProgrammedCycles Cycle Shirt Bleach StarchDescription Min secStep Cycle Shirt DelicateDescription Min secStep Pre-ProgrammedCycles Cycle Uniforms BleachDescription Min secStep Cycle Rags Heavy SoilDescription Min secPre-ProgrammedCycles Cycle Rewash/Reclaim Cycle Supply SetupStep DescriptionCold Fill to High Level Step Pre-ProgrammedCycles Cycle Energy HotDescription Min secCold Fill to Low Level Warm Fill to Low Level Step Cycle Gentle ColdDescription Min secStep Pre-ProgrammedCycles Cycle Perm Press 60CDescription Min secCold Fill to High Level Operation Inverter Drive Error CodesName Description and NOTESNote Resetting the inverter initializes Inverter Drive Error CodesOperation NameOperation Inverter Drive Error CodesName Description and NOTESOperation Inverter Drive Error CodesName Description and NOTES