Kramer Electronics 2900-3000730 Rev 2 Installing the Inner Frame, Installing a MegaTOOL

5.1.3Installing a MegaTOOL

To install a MegaTOOL, as shown in Figure 3:

1.Screw the supplied spacers to their designated places (one on each side).

2.Insert the MegaTOOL, from beneath, through the MegaTOOL opening.

3.Screw the screws (one on each side) through the frame holes and spacers.

Figure 3: Installing the MegaTOOL

5.2Installing the Inner Frame

To install the inner frame:

1.Place the inner frame inside the TBUS-6xlenclosure.

2.Set the required height using your fingers to bring the inner frame to the desired position, screw and tighten it in place using the height adjustment screws (supplied with the inner frame).

iInner frame kits come with assembly instructions.

10 TBUS-6xl - Installing the TBUS-6xl