4 Your TBUS-6xl Enclosure
Figure 1: TBUS-6xl Enclosure Top View
| # |
|
| Feature |
| Function | |
| 1 |
| Black Anodized/Brushed |
| Includes an opening for cable | ||
|
|
|
| Clear Textured Lid |
| frame, leaving the table surface neat and tidy | |
| 2 |
| Outer Rim |
| Fits over the table surface. | ||
|
|
|
|
|
|
| A protective rubber guard protects the outer rim during |
|
|
|
|
|
|
| shipping. Remove it before installing the unit |
| 3 |
| Lid Housing |
| When opened, the lid retracts into the lid housing | ||
| 4 |
| Set | Rubber Protectors |
| Protect the table surface when mounting the unit (one for | |
|
|
|
|
|
| each clamp) | |
|
| 5 |
| Locking Butterfly |
| Tighten to lock the mounting butterfly screw (one for each | |
|
| Clamping |
| ||||
|
|
|
| Screws |
| clamp) | |
|
|
|
|
|
| ||
| 6 |
|
| Mounting Butterfly |
| Tighten to secure the unit to the table surface (one for each | |
|
|
|
| Table | Screws |
| clamp) |
|
| 7 |
| Mounting Brackets |
| table – to secure the unit to the table surface (one for each | |
|
|
|
| Fit in the bracket slits after inserting the enclosure into the | |||
|
|
|
|
|
|
| clamp) |
| 8 |
| Bracket Slits |
| For attaching the two mounting brackets on opposite sides | ||
| 9 |
| Height Adjustment |
| The screw holes on each side panel are used for adjusting the | ||
|
|
|
| Screw holes |
| height of the Inner Frame | |
| 10 |
| Tie Holes |
| Insert the | ||
|
|
|
|
|
|
| through cables to the inside walls of the unit |
| 11 |
| Enclosure |
| Inserted into the table cut out | ||
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
| |
