Kramer Electronics FC-14 user manual Converting an RGB Source

Using Your RGBHV to Component Transcoder

5.1 Converting an RGB Source

You can convert an RGB signal to Y, B-Y, R-Y, via a FC-14RGBHV to Component Transcoder, as the example in Figure 2 illustrates, as follows:

1.Connect the RGB video camera to the R, G and B BNC inputs.

2.Connect the Y, B-Y, and R-Y outputs to the BETACAM VCR.

3.Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity.

4.Press the RGsB input format selector.

The camera’s RGB signal converts and outputs to the BETACAM VCR.

5.Switch on the power.

The Power switch illuminates.

Figure 2: Converting from an RGB Camera to a BETACAM VCR

4 KRAMER ELECTRONICS, LTD.