Kramer Electronics FC-14 user manual Converting a VGA Source

Using Your RGBHV to Component Transcoder

5.4 Converting a VGA Source

You can convert and output a VGA signal (or SVGA, XGA, UXGA) to Y, B-Y, R-Y, via a FC-14RGBHV to Component Transcoder, as the example in Figure 5 illustrates, as follows:

1.Connect the VGA graphics source to the RGBHV DB15F input connector.

2.Connect the Y, B-Y, and R-Y outputs to the plasma monitor.

3.Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity.

4.Press the RGsB input format selector.

The signal from the RGsB VGA graphics source converts and outputs to the plasma monitor.

5.Switch on the power.

The Power switch illuminates.

Figure 5: Converting from a VGA Graphics Source to a Plasma Monitor

7