Kramer Electronics FC-14 Using Your RGBHV to Component Transcoder, Feature, Function, 12V DC

Using Your RGBHV to Component Transcoder

Table 1: Front Panel FC-14 RGBHV to Component Transcoder

#	Feature	Function
1	POWER Switch	Illuminated switch supplying power to the unit
2	RGBHV Button	Selects RGBHV as the input format
3	RGBS Button	Selects RGBS as the input format
4	RGsB Button	Selects RGsB as the input format
5	RsGsBs Button	Selects RsGsBs as the input format

Table 2: Rear Panel FC-14 RGBHV to Component Transcoder

#	Feature	Function
1	R IN BNC Connector	Connects to the component video source when selecting
2	G IN BNC Connector	RGB/S or YUV as the input. Automatically detects
		whether RGBS or RGsB is input when in the RGB mode
3	B IN BNC Connector
4	H/S IN BNC Connector	Connects to the horizontal sync input
5	12V DC	Power Connector ￿￿ VDC, 80mA
6	V IN BNC Connector	Connects to the vertical sync input
7	R-Y OUT BNC Connector
8	B-Y OUT BNC Connector	Connects to the component video acceptor
9	Y OUT BNC Connector
10	RGBHV IN DB15F Connector	Connects to the component video source

5 Using Your RGBHV to Component Transcoder

You can use your FC-14following source signals

RGBHV to Component Transcoder to convert the to component video signals:

￿￿An RGB source (see section 5￿ .1)

￿￿An RGBS source (see section 5￿ .2)

￿￿An RGBHV source (see section 5￿ .3)

￿￿A VGA source (see section 5￿ .4)

3