Kramer Electronics FC-14 user manual Converting an RGBS Source

Using Your RGBHV to Component Transcoder

5.2 Converting an RGBS Source

You can convert an RGBS signal to Y, B-Y, R-Y, via a FC-14RGBHV to Component Transcoder, as the example in Figure 3 illustrates, as follows:

1.Connect the RGBS workstation to the R, G, B and H/S BNC inputs.

2.Connect the Y, B-Y, and R-Y outputs to the plasma monitor.

3.Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity.

4.Press the RGBS input format selector.

The RGBS workstation’s signal converts and outputs to the plasma monitor.

5.Switch on the power.

The Power switch illuminates.

Figure 3: Converting from an RGBS Workstation to a Plasma Monitor

5