Configuring and Operating your
7.1.1The Mode Submenu
Table 4 defines the MODE submenu features:
| Table 4: The MODE Submenu Features |
|
|
Mode | Function |
SINGLE | Displays one input channel at a time on the screen (full screen display). The LCD display |
| shows the display mode and the selected channel, for example, “Single Mode – Channel 2” |
PIP | Displays all 3 input channels1 on the screen. Once the PIP mode is selected, the PIP SIZING |
| and PIP POSITION commands appear, as illustrated in Figure 6 (see section 7 .1.1.1). The |
| LCD display shows “PIP Mode” |
Figure 6: PIP Mode
When selecting the SINGLE mode following the PIP mode, the input channel (that is currently selected) is displayed.
7.1.1.1PIP Sizing and Position
To size and/or position a PIP image (as Table 5 defines):
1.Press the desired input channel button (1 to 3)1. The input button blinks.
2.Select either PIP SIZING or PIP POSITION (using the up/down arrow buttons) and press ENTER.
| Table 5: PIP Sizing and Positioning Features |
|
|
Menu Item | Function |
PIP SIZING | Use the , arrow buttons to select between 1/1, 1/4, 1/9 and 1/16 display sizes or OFF2 |
PIP POSITION | Use the , , and arrow buttons to position the selected channel vertically |
| and horizontally |
1 |
| |
2 | If OFF is selected, the selected input channel will not be displayed on the screen | |
|
| |
14 | KRAMER: SIMPLE CREATIVE TECHNOLOGY | |
