Kramer Electronics PIP-300, PIP-200xl Connecting a PC without using a Null-modem Adapter

Connecting the PIP-300 Picture in Picture Inserter

6.1 Connecting a PC

To connect a PC to the PIP-300unit, using the Null-modem adapter provided with the machine (recommended):

￿￿Connect the RS-232 DB9 rear panel port on the PIP-300unit to the Null-modem adapter and connect the Null-modem adapter with a 9-wire flat cable to the RS-232 DB9 port on your PC

To connect a PC to the PIP-300unit, without using a Null-modem adapter:

￿￿Connect the RS-232 DB9 port on your PC to the RS-232 DB9 rear panel port on the PIP-300unit, as Figure 4 illustrates

PIN 5 Connected to PIN 5 (Ground)

PIN 3 Connected to PIN 2

PIN 2 Connected to PIN 3

Female DB9 (From PC)	Male DB9
PIN 4 Connected to PIN 6
PINS 8, 7, 1 Connected together
If a Shielded cable is used, connect the shield to PIN 5

Figure 4: Connecting a PC without using a Null-modem Adapter

11