Configuring and Operating your
7.2 Displaying the Layers in the PIP Mode
To display a picture in picture on the screen, do the following:
1.Select an input.
2.Select the PIP mode.
3.Size and position each layer as desired1.
4.Press an INPUT button to bring forward that input on the screen.
7.2.1Selecting a Different Channel as the Background
In the following example, Channel 2 replaces Channel 3 as the background.
A
The current screen shows:
Channel 3 in the background (PIP SIZING: 1:1)
Channel 1 in front (PIP SIZING: 1:16)
Channel 2 in front (PIP SIZING: 1:4)
B | Select Channel 2 and size it to 1:1 as follows: |
| A. Press INPUT 2 |
| |
| B. Press the LAYER button (or follow steps 1 to 3) |
| 1. Press ENTER |
| 2. Press ENTER again to select MODE |
| 3. Scroll down to PIP and press ENTER |
| C. Press ENTER to select PIP SIZING |
| D. Press ENTER to size to 1:1 |
| The current screen shows: |
Channel 2 in front (PIP SIZING: 1:1)
Channels 1, and 3 are behind, unseen
C
Press INPUT button 1, or 3
The current screen shows:
Channel 2 in the background
Channels 1 and 3 in front
Size and position channels 1 and 3 as desired
1 Only one channel can be sized to 1:1, the others should be smaller in size or OFF (see Table 6)
17