Kramer Electronics VP-81 K user manual Command Part Details, #CR ~OK Crlf

11.2.2Command Part Details

Command:

Sequence of ASCII letters ('A'-'Z', 'a'-'z' and '-').

Command will separate from parameters with at least single space.

Parameters:

Sequence of Alfa-Numeric ASCII chars ('0'-'9','A'-'Z','a'-'z' and some special chars for specific commands), parameters will be separated by commas.

Message string:

Every command must to be entered as part of message string that begin with message starting char and end with message closing char, note that string can contain more then one command separated by pipe ("") char.

Message starting character: '#' for host command\query. '~' for machine response.

Device address (optional, for K-Net):

K-Net Device ID follow by '@' char.

Query sign = '?', will follow after some commands to define query request.

Message closing char =

Host messages - Carriage Return (ASCII 13), will be referred to by CR in this document.

Machine messages - Carriage Return (ASCII 13) + Line-Feed (ASCII 10), will be referred to by CRLF. Spaces between parameters or command parts will be ignored.

Command chain separator char:

When message string contains more than one command, commands will be separated by pipe ("").

Command entering:

If terminal software used to connect over serial \ ethernet \ USB port, that possible to directly enter all

commands characters (CR will be entered by Enter key, that key send also LF, but this char will be ignored by commands parser).

Sending commands from some controllers (like Crestron) require coding some characters in special form (like \X##). Anyway, there is a way to enter all ASCII characters, so it is possible to send all commands also from controller.

(Similar way can use for URL \ Telnet support that maybe will be added in future).

Command forms:

Some commands have short name syntax beside the full name to allow faster typing, response is always in long syntax.

Command chaining:

It is possible to enter multiple commands in same string by '' char (pipe).

In this case the message starting char and the message closing char will be entered just one time, in the string beginning and at the end.

All the commands in string will not execute until the closing char will be entered. Separate response will be sent for every command in the chain.

Input string max length:

64 characters.

Backward support:

Design note: transparent supporting for protocol 2000 will be implemented by switch protocol command from protocol 3000 to protocol 2000, in protocol 2000 there is already such a command to switch protocol to ASCII protocol (#56 : H38 H80 H83 H81).

Help Commands

	Command	Syntax		Response
	Protocol Handshaking	#CR	~OK
					CRLF
	Device Initiated Messages
	Command			Syntax
	Start message		Kramer Electronics LTD. ,
								Device
				Model		Version	Software	Version
30						VP-81K - Kramer Protocol