Kramer Electronics VS-66H3 user manual OUTPUT HDMI Connectors 1 to

Defining the VS-66H3 6x6 HDMI Matrix Switcher

Figure 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel

Table 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel Features

#	Feature			Function
13	OUTPUT HDMI Connectors (1 to 6)	Connect to up to 6 HDMI acceptors
14	INPUT HDMI Connectors (1 to 6)	Connect to up to 6 HDMI sources
15	RS-2329-pin D-sub Serial Port Connector	Connect to a PC/serial controller
16	ETHERNET RJ-45 Connector	Connect to a PC via a LAN
17	ETH RESET Button	Press to reset to the factory default IP parameters1
18	REMOTE IR Opening2	Connect to an external IR receiver for controlling the device via an IR remote controller (see
			Section 4.1)
19	Mains Power Connector	Connect to the mains power
20	Mains Power Fuse	Fuse for protecting the device
21	Mains Power Switch	Switch for turning the device on or off

1 First turn the VS-66H3 off and then turn it on again while pressing the ETH RESET button. The device will power up and load its memory with the factory default IP parameters 2 Covered by a cap. The 3.5mm jack at the end of the internal IR connection cable fits into this opening

7