Defining the
Figure 1:
Table 1:
# | Feature |
| Function | |||
1 | IR LED |
| Lights yellow when receiving signals from the infrared remote control transmitter | |||
2 | IR Receiver |
| Signal receiver for the Infrared remote control transmitter | |||
3 | POWER LED |
| Lights when the device is turned on | |||
4 | ALL Button |
| Press followed by an input button to connect the selected input to all outputs1 | |||
5 | OFF Button |
| Press after pressing an output button to disconnect the selected output from the inputs. | |||
|
|
| To disconnect all the outputs, press ALL followed by OFF | |||
6 | STO Button |
| Press to store the current switching setting to a preset (see Section 7.3) | |||
7 | RCL Button |
| Press to recall the current switching setting from a preset (see Section 7.3) | |||
8 | LOCK Button |
| Press and hold to toggle the locking/release of the front panel buttons. | |||
|
|
| When storing or recalling presets, press to store or recall the preset (see Section 7.3) | |||
|
|
|
|
|
| |
9 | EDID Button |
| Press to capture the EDID (see Section 7.2) | |||
10 | SELECT Buttons2 | IN (1 to 6) | Press to select the input to switch after selecting an output | |||
11 | OUT (1 to 6) | Press to select an output to switch followed by an input | ||||
| ||||||
12 | INPUT |
| Displays the input currently switched to the output which is marked above each input |
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs 2 These are also used for storing and recalling device setups (see Section 7.3)
6 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |