Upgrading the Firmware
7.6.2Connecting the Ethernet Port via a Network Hub
You can connect the Ethernet port of the
8Upgrading the Firmware
For instructions on upgrading the firmware see the “STC Firmware Upgrade” document.
9Technical Specifications
The
Table 3: Technical Specifications1 of the
INPUTS: | 6 HDMI Connectors |
OUTPUTS: | 6 HDMI Connectors |
BANDWIDTH: | 2.25Gbps bandwidth per graphic channel |
COMPLIANCE WITH | HDMI and HDCP |
HDMI STANDARD: |
|
RESOLUTION: | Up to UXGA; 1080p |
POWER SOURCE: | 100−240V AC, 50/60Hz, 33VA |
CONTROLS: | Front panel buttons, infrared remote control transmitter, |
DIMENSIONS: | 19” x 10.9” x 1U (W, D, H) |
WEIGHT: | 2.1kg (4.6lbs) approx. |
ACCESSORIES: | Power cord, IR transmitter, rack ”ears” |
OPTIONS: | Kramer HDMI cables2, external remote IR receiver cable |
10 | Default EDID | |
| Monitor |
|
| Model name | |
| Manufacturer | KRM |
| Plug and Play ID | KRM0200 |
| Serial number | 1 |
| Manufacture date | 2010, ISO week 24 |
|
| |
| EDID revision | 1.3 |
| Input signal type | Digital (DVI) |
| Color bit depth | Undefined |
| Display type | RGB color |
| Screen size | 700 x 390 mm (31.5 in) |
| Power management | Not supported |
| Extension blocs | 1 |
1 Specifications are subject to change without notice
2 For best results, use Kramer cables such as the
16 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |