Kramer Electronics VS-66H3 user manual Contents, Figures

Contents

Contents

1	Introduction	1
2	Getting Started	1
2.1	Quick Start	2
3	Overview	3
3.1	Defining the EDID	3
3.2	About HDMI	4
3.3	About HDCP	4
3.4	Recommendations for Best Performance	5
4	Defining the VS-66H3 6x6 HDMI Matrix Switcher	5
4.1	Using the IR Transmitter	8
5	Installing the VS-66H3 in a Rack	9
6	Connecting the VS-66H3 6x6 HDMI Matrix Switcher	10
7	Operating the VS-66H3 6x6 HDMI Matrix Switcher	11
7.1	Switching an Input to an Output	11
7.2	Acquiring the EDID	11
7.2.1	Acquiring the EDID from One Output	11
7.2.2	Acquiring the EDID from Several Outputs	12
7.2.3	Acquiring the Default EDID	12
7.3	Storing and Recalling a Switching Setting from a Preset	13
7.4	Resetting the VS-66H3 6x6 HDMI Matrix Switcher’s IP Parameters	13
7.5	Connecting to the VS-66H3 6x6 HDMI Matrix Switcher via RS-232	13
7.6	Connecting to the VS-66H3 6x6 HDMI Matrix Switcher via Ethernet	14
7.6.1	Connecting the Ethernet Port directly to a PC	14
7.6.2	Connecting the Ethernet Port via a Network Hub	16
8	Upgrading the Firmware	16
9	Technical Specifications	16
10	Default EDID	16
11	Default Communication Parameters	19
12	Kramer Protocol 2000	20
Figures
Figure 1: VS-66H3 6x6 HDMI Matrix Switcher Front Panel		6
Figure 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel		7
Figure 3: Connecting the VS-66H3 6x6 HDMI Matrix Switcher		10
Figure 4: Local Area Connection Properties Window		15
Figure 5: Internet Protocol (TCP/IP) Properties Window		15

i