Kramer Electronics WP-500 user manual Cond Dyn, 5.1.1Connecting the Microphone

Using Your WP-500

5.1.1Connecting the Microphone

You can connect either a dynamic or a condenser microphone to the MIC IN 3.5mm mini jack.

Before connecting the microphone, set the microphone mode switch to dynamic or condenser (by default, this switch is set to dynamic).

The Dyn/Cond mode switch is located behind the front panel on the lower left side of the MIC IN 3.5mm jack, as illustrated in Figure 5.

It is recommended to set the mic mode switch before mounting the WP-500front panel.

Cond

Dyn

CV

Dyn/Cond Mode Switch

Figure 5: Setting the Microphone Mode Switch

When disconnecting the microphone or switching it OFF, turn the

microphone volume adjustment knob to the left (MIC mute).

When using the microphone, pay attention to the placement of the speakers. By placing the speakers properly, the chance of getting audio feedback is minimized.

8 KRAMER: SIMPLE CREATIVE TECHNOLOGY