Krell Industries 222 Remote Control Description, Battery Installation and Removal, AAmp Pwr Key

(SECTION FOUR: Anatomy of an Evolution 222 continued)

Remote Control Description

See Figure 2 on the previous page

The Evolution 222 remote provides the same power, preamplifier, level control, and navigate/customize functions as the preamplifier’s front panel. In addition, the remote has CD and DVD functions, and menu configuration functions.

Keys Labled 1 to 14

These remote keys have the same function (and callout number) as the corre- sponding front panel controls described in the preceding pages.

Keys Labled A to J

These remote keys have functions that are unique to the remote control, and are described below.

Battery Installation and Removal

The remote control uses 2 AAA-size 1.5 Volt batteries. Batteries are included with the shipment. To install the batteries:

1.Remove the remote control backplate, using the supplied T-10 Torx wrench.

2.Install the batteries, following the battery position diagram on the plastic battery receptacle.

3.Replace and secure the backplate.

Notes

Replace batteries when remote control function becomes intermittent.

Remove batteries if the remote control is not used for a long period of time. Battery leakage can damage the remote control.

Amplifier Functions

AAmp Pwr Key

Use this key to activate Krell amplifiers connected to your system.

BSel (Meter Select) Key

Use this key to select the meter range of the power meter scale on the front of a Krell Evolution One power amplifier. Please refer to the Evolution One Owner’s Reference, for more information.

Balance Functions

CBal(ance) Keys

Use these with the level keys (14) to adjust the left and right channel balance.

20