Krell Industries 222 manual Back Panel Description, Inputs, Outputs, Configurations, 17Tape Input

Back Panel Description

See Figure 3 on the previous page

The preamplifier back panel provides all input and output connections, remote control inputs and outputs, and the power connection. Back panel features and their descriptions follow.

Inputs

15Balanced Inputs: B-1, B-2

These are balanced analog source inputs with XLR connectors.

16Single-ended Inputs: S-1, S-2, S-3

These are single-ended analog source inputs with RCA connectors.

17Tape Input

This is a single-ended tape input, for use with a tape source.

18C-1 and C-2 CAST Inputs

These are CAST inputs with 4-pin bayonet connectors, for use with Krell CAST-equipped input devices.

Outputs

19 Tape Output

This single-ended analog output is used for recording the selected input

source.

20 Main Outputs

The Evolution 222 is equipped with one single-ended output with RCA con- nectors, one balanced output with XLR connectors, and two CAST preamplifi- er outputs with 4-pin bayonet connectors, for use with Krell CAST-equipped amplifiers.

Configurations

21CAN Link

These RJ-45 link connectors are connected in parallel. They are used to con- nect the Evolution 222 preamplifier to other CAN Link-enabled Krell products.

continued

23