Krell Industries 222 manual Link Control CAN Link, Mute

LINKED, UNLINKED.

Link Control (CAN Link)

This function enables you to link and unlink CAN Link-enabled Krell products. The options are:

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or the up and down keys (14) on the remote control to select: LINK CONTROL.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: LINKED.

3.Use the level control knob or the up and down keys to select the desired

option: LINKED, or UNLINKED.

4.Press the enter button or key to confirm the selection. The front panel reads:

LINKED.

LINKED

When preamplifier channels are linked, power, volume, balance, phase, tape, mute, and input selections are automatically communicated between linked pre- amplifier channels. All other settings remain local.

UNLINKED

When a preamplifier channel is unlinked, it does not respond to commands from any other linked preamplifier channels. After the preamplifier channel is unlinked, settings can be changed, independent of other preamplifier channels.

Mute

This function enables you to control the mute mode. Options are: FULL, -20 dB, BACK.

Enter the menu, then:

1.Use the level control knob, or the up and down keys (14) to select: MUTE.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: FULL.

3.Use the level control knob, or the up and down keys to select the desired

option: FULL or -20 dB.

4.Press the enter button or key to confirm the selection. The front panel display reads: MUTE.

FULL

The output of the Evolution 222 is completely silenced.

-20dB

The output of the Evolution 222 is reduced by 20 dB and may still be audible.

continued

37